Based on Samantha Bittman’s mini loom design I made the Fab Loom stronger, bigger with the inter lockable rings for different style cones. You can extend the loom or modify the corn using template below or just last cut them as is.
Download 18X8 Loom
EPS 18×8 Loom
Contribute with Github
You will need
Access to a Laser Cutter (cuts 24″ x 12″ )
24″wide x 12″height 1/8 thick plywood
Laser cut all parts using the EPS file.
Black: Cut all the way through.
Start with the base
Make sure the hooks faces inwards.
Push the hook inwards
Now for the two other sides, push the finger joins down on both sides.
Lock the cone together